Electric Flapjack Guitars: Verkstaden

A Week in the Shop

17 Jun 2023 - älgen, carving, hásten, laser-cutting, neck, spraying, verkstaden

The race is on to get Älgen ready for Liverpool Makefest, I dodge a knot as I carve Hästens neck, and I say who needs scissors if you have a laser-cutter?

A view of the 3D-printed lattice-work guitar body in the spray booth ready to be sprayed.

A Week in the Shop

27 May 2023 - andy powers, grain filler, hästen, joe cocker, mistakes, neck, verkstaden

A long write-up this week, as I make progress, make a significant mistake, make a recovery from my mistake, and make more progress.

A work-in-progress guitar neck sits on the workbench, surrounded by sawdust on the floor.

A Week in the Shop

5 May 2023 - delfinen, emily hopkins, harp, hästen, jigs, routing, templates, verkstaden

A quick review of all the in-progress guitar builds, a bunch of progress on the offset build, putting an excessively complicated jig to use, and finally some fun facts about harps.

Three work in progress guitars sit on a workbench, each a body with a neck beside it. All are raw wood and unfinished. The left body has pickup cavities and a neck pocket cut, and the neck is just roughly shaped with a template on top. The middle one is the most complete, with the neck fretted and all the body holes cut. The right body has only a neck pocket but no other holes init, but the neck is fretted and otherwise complete.

A Week in the Shop

9 Apr 2023 - älgen, harley benton, staining, verkstaden

A trip to Wales, where I get to play guitars in some amazing scenery, more practicing with wood stains, and some frustrating string breakages.

Me standing holding a guitar in the Snowdia landscape, with a hill to my left and a lake to my right.

A Week in the Shop

2 Apr 2023 - 3D-printing, amp, colour, form 3, formlabs, fusion 360, stain, verkstaden

A grab bag of bits this week: 3D printing a custom control for one guitar, testing out staining options for another, fitting a new transformer to my practice amp, and doing a little bit of electronics on my pickup winder.

A set of four postcard-sized rectangles of maple on a workbench, each with a different stain blend being tested: first is just straight yello, the second is orange over yellow, the third is red over yellow, and then the last is yellow, orange, and red.

A Week Out the Shop

26 Feb 2023 - archtop, bhm, cad, delfin, fusion 360, rendering, templates, verkstaden

A week spent paying off some CAD debt to fuel the workshop time, and a look at another builder of some amazing archtop guitars.

A 3D render of my älgen guitar design, which has a central wooden core that starts as the neck and continues the full length of the body, and then has a 3D printed latice either side where the guitar body would usually be.

A Week in the Shop

22 Jan 2023 - delfin, fretting, kerf, laser cutting, neck, palm router, verkstaden

Getting back into the swing of things with making dust in the workshop: a neck gets prepped and fretted, and I try out my new ferrule block technique to learn that it needs improving.

A guitar body sat on the workshop, with a couple of parts laid on top of it to give the impression of how it might look when finished. The top is a nice birds-eye maple, and on one side it is nicely rounded, and on the other side it has a pointy horn to it.

A brief week in the shop

14 Sep 2020 - laser cutting, neck, verkstaden

I make progress on the new guitar model as I work out what I can and can't do in my new workshop home, and I spend some time laser-cutting pick-guards for another builder.

A roughly shaped guitar neck is on a pillar drill, with the holes for the tuning pegs being drilled.

Tags > Verkstaden